Vertical Adjustments

• 1). Turn the adjustable hinge screws on both hinges counterclockwise with a Phillips screwdriver to loosen them. One screw is located at the top of the hinge, and one is at the bottom. Do not remove the screws.
  
  
• 2). Slide the cupboard door up or down to center it on the cabinet. The cupboard door will adjust slightly up or down in the hinge.
  
  
• 3). Hold the cupboard door in place when it's centered, and tighten the adjusting screws by turning them fully clockwise.
  
  

Horizontal Adjustments

• 1). Turn the locking screws on both door hinges counterclockwise with a Phillips screwdriver to loosen them. The locking screw is the farthest from the edge of the cupboard door.
  
  
• 2). Loosen the adjusting screw with a Phillips screwdriver. The adjusting screw is nearest to the edge of the cupboard door.
  
  
• 3). Slide the cupboard door to the left or right until it covers the cabinet opening and is centered.
  
  
• 4). Hold the door in place, and tighten first the adjusting screw and then the locking screw on each hinge to hold it in place.
  
  

Angle Adjustment

• 1). Loosen the locking screw slightly with a Phillips screwdriver by turning it counterclockwise.
  
  
• 2). Loosen only the adjusting screw on the top hinge of the door, and slide it left to open the gap at the top of the door and to close the gap at the bottom of the cupboard door.
  
  
• 3). Loosen only the adjusting screw on the bottom hinge of the door, and slide it right to close the gap at the bottom of the door and to open the gap at the top of the cupboard door.
  
  
• 4). Hold the door in the correct position, and tighten first the adjusting screw and then the locking screw by turning them fully clockwise.