Instructions for a Beaded Tea Pot Charm
- 1). Feed the headpin up through the bottom of the lower teapot bead caps, so the wide part of the pin sits flush against the bottom of the teapot.
- 2). Slide on the bead or pearl, pushing it down until it is cupped by the bottom of the teapot.
- 3). Insert the top bead cap, with the concave portion going on the wire first. Push it down until it cups the bead or pearl.
- 4). Feed the small silver loop onto the wire so it sits on the top of the teapot.
- 5). Loop the wire around, until it makes a small loop. Cut off the excess. It should be small, but not so small that it keeps the other loop from moving freely.
- 6). Open the loose loop with the needle nose pliers when attaching the charm to a charm bracelet.
Source...