How to Make a Higher Wavemaster Bag
- 1). Place a 24-by-24-by-1-inch board on the ground to form the base.
- 2). Align two of the 2-by-4-by-24-inch boards at each edge for support and one in the middle of the base with the 2-inch edge flush against the base. Screw in cross-supports with five screws in each support to the base--one at each edge and the other three evenly spread out the length of the 2-by-4 support.
- 3). Set the other 24-by-24-by-1-inch board on top of the cross-supports, creating the central stand. Screw this board into the cross-supports in the same manner as the 2-by-4 support.
- 4). Take the remaining 2-by-4-by-24-inch boards and place them opposite one another to frame the perimeter of the central stand. Screw the wooden boards to the central stand.
- 5). Position the 2-by-4-by-22-inch boards in the spaces between the boards in the central stand, forming a square. Screw these two boards into them.
- 6). Put the Wavemaster bag into the space on the central stand.
Source...