Water Fountain

• 1). Place the aquarium pump in the center of the bowl. Most aquarium water pumps have small suction cups on the base; if this is the case, moisten the bottom of the suction cups before attaching to the bowl.
  
  
• 2). Attach one end of the rubber tubing to the aquarium pump.
  
  
• 3). Place the river rocks around and over the aquarium pump and tubing, leaving the open end of the tube slightly exposed above the surface.
  
  
• 4). Fill the bowl with water, leaving the top layer of stones exposed.
  
  
• 5). Plug the pump into the wall. Place a few river rocks over the cord to disguise it.