How to Set Up Viewsat Ultra & SG2100
- 1). Assemble the SG2100 motor per the assembly diagram (see References). Aim the motor true south via the magnetic variation table that comes with the motor.
- 2). Set the motor elevation angle with the inclinometer that came with your motor.
- 3). Attach the Viewsat antenna dish to the motor with the hardware provided. Set the declination angle to 40 degrees per the declination table on the motor.
- 4). Connect the coaxial cable to the satellite dish. Connect the other end of the coaxial cable to the Satellite In jack on the Viewsat receiver.
- 5). Connect the component cables to the Video and Audio outputs on the Viewsat. Connect the other ends of the component cables to the Video and Audio inputs on your TV.
Source...