Refinishing Swimming Pools
- 1). Drain all of the water from the pool. Wait until the pool is completely dry.
- 2). Remove leaves and other debris from the pool using a broom. Clean the swimming pool using a pressure washer. Wait for the pool to dry out.
- 3). Abrade the swimming pool to promote adhesion by sanding it. Skip this step if the pool is concrete.
- 4). Pour two to three gallons of Aqua Luster acrylic pool paint into a 5-gallon bucket. Attach the roller to an extension pole.
- 5). Coat the walls of the swimming pool with Aqua Luster. Coat every wall before moving on to the pool floor.
- 6). Coat the swimming pool floor with Aqua Luster. Begin at the far end of the pool, and work moving backward toward the pool's exit point.
- 7). Wait a full day before filling the pool.
Source...