How to Install Leupold Scope Rings
- 1). Clean the surfaces of the rifle’s upper receiver and the scope mounts.
- 2). Remove the plug screws from the rifle’s receiver with your screwdriver. Typically, there are two in front of the chamber and two behind it.
- 3). Attach the Leupold mounts on the upper receiver with the supplied screws.
- 4). Place the base of the scope ring into the hole on top of the mount with the rings parallel to the barrel. Turn the rings 90 degrees; the rings will lock into place. The scope rings are now ready to have a scope installed.
Source...