DIY Keyless Entry
- 1). Sit in your driver's seat with your ignition key and keyless remote. Close your driver's door behind you and insert your key into the ignition.
- 2). Turn the ignition key from "Off" to the "Run" slot eight times within the first 10 seconds, and end the eighth cycle in the "Run" position.
- 3). Wait for the locks on the car to automatically cycle after you are done turning your key, and press and hold any button on your remote within the first 30 seconds.
- 4). Hold the button for up to 20 seconds until the locks click again. This will confirm that the remote has been programmed to the system and you can remove the ignition key to end the process.
Source...