How to Align T-Rex 600 Batteries
- 1). Slide the male connector located on the motor into the female connector on the battery.
- 2). Place the battery on the battery plate.
- 3). Secure loosely the battery to the battery plate by wrapping hook-and-loop tape around the battery and the battery plate.
- 4). Move the battery along the battery plate, which is already secured to the helicopter, so the center of gravity of the helicopter is balanced. The helicopter will be level when it is lifted into the air by its main rotor blades. The position of the battery's weight will affect the balance of the helicopter.
- 5). Tighten and secure the hoop-and-loop tape around the battery with a hook-and-loop tape fastener.
Source...