DIY Projector Screen Wall
- 1). Place a drop cloth on the floor against the wall that will become your projection screen.
- 2). Sand the wall with rough sandpaper to even out the surface. Vacuum the baseboard around the wall when you are done using the rough sandpaper.
- 3). Place a can of paint primer on the drop cloth. Open the lid. Stir the paint primer with a wooden stirring stick for five minutes.
- 4). Pour paint primer into a paint roller tray. Roll the paint roller in the paint roller tray.
- 5). Place the paint roller at the upper left corner of the wall. Roll the paint roller down to the baseboard with an even and smooth motion. Replenish the paint on the paint roller and repeat this procedure, moving across the wall from left to right.
- 6). Close the lid on the paint primer. Let the wall dry for a day.
- 7). Place a can of screen paint primer on the drop cloth. Open the lid. Stir the screen paint primer with a new wooden stirring stick for five minutes.
- 8). Pour screen paint primer into a new paint roller tray. Roll a new paint roller in the paint roller tray.
- 9). Paint the wall with the screen paint primer in the same manner as was done with the paint primer. Close the lid on the screen paint primer. Let the wall dry for two days.
- 10
Place a can of screen paint on the drop cloth. Open the lid. Stir the screen paint with a new wooden stirring stick for five minutes. - 11
Pour screen paint into a new paint roller tray. Roll a new paint roller in the paint roller tray. - 12
Paint the wall with the screen paint in the same manner as was done with the paint primer. Close the lid on the screen paint primer. Let the wall dry for a day. Repeat the process to apply a second coat of screen paint to the wall, using a new paint roller and paint roller tray. Let the wall dry for a day. - 13
Put away the paint cans. Remove the drop cloth. Vacuum around the baseboard of the wall.
Source...