How to Plant the Flowering Plant Called Heather
- 1). Check the soil for acidity. Purchase a soil testing kit, available from garden centers or extension offices. Follow the instructions included with the kit, as these differ between manufacturers.
- 2). Adjust the acidity, or soil pH, of the planting area so it is between 4.0 and 6.0. Add sulfur, available at garden centers, to reduce the pH to this range. Apply it at the rate indicated by the soil test.
- 3). Dig the planting hole to the same depth as the nursery pot the heather is in, but slightly wider. Space planting holes 24 to 36 inches apart.
- 4). Water the heather in its nursery pot until the excess begins to drain from the bottom. Thump the sides of the pot to loosen the soil, then lift the heather out of the pot.
- 5). Set the heather in the planting hole. Add or remove soil under the heather until its crown, where the stems emerge from the roots, sits at or slightly above the soil surface.
- 6). Fill in the hole around the heather with the removed soil. Firm it lightly in place with your hands.
- 7). Water the heather immediately after planting, as the water collapses any air pockets in the soil around the roots. Moisten the soil to a 6-inch depth.
Source...