Bazooka Amp Instructions
- 1). Select a spot on the interior of your vehicle to mount the Bazooka amp. This location should be in a spot where you will not damage the underside of the vehicle or any internal components by drilling holes. Mark four mounting holes and drill small starter holes in these locations. Place the amplifier above the holes and insert the tapping screws provided to mount the device.
- 2). Connect a line of power wire from the "+12V" terminal on the back of the amplifier to the positive terminal on the car's battery. Connect a line of power wire from the "GND" terminal on the back of the amplifier to a spot of metal on your vehicle's body. Wrap it around a metal area. Connect the remote power control wire from your vehicle's radio to the "REM" input on the device.
- 3). Connect the left and right RCA cables from your car's stereo to the left and right "Line In" inputs on the back of the device. The Bazooka amp will also have "Line Out" jacks above the inputs; with these inputs, you can use a set of RCA cables to connect this amplifier to another amplifier in a series.
- 4). Connect the positive and negative wires from each speaker to the positive and negative speaker inputs on the back of the amplifier. Each set of speaker inputs will be labeled "Left" and "Right" and "Front" and "Back" to help you determine which wires to connect to which input.
Source...