Refinishing

• 1). Remove the doors from the cabinets by removing the screws securing the hinges to the door. Place the doors on a clean work surface.
  
  
• 2). Sand the cabinet doors with medium-grade sandpaper. This will strip the original finish. Sand the doors again with fine-grade sandpaper to make the wood smooth. Wipe the doors with a damp cloth.
  
  
• 3). Mix the stain thoroughly and pour a small amount into a small bucket. Spread the stain over the cabinet door with a paintbrush or cloth. Always work with the grain. Let the stain soak into the wood for about 30 seconds, then wipe away the excess with a clean cloth.
  
  
• 4). Let the stain dry completely. Stir the polyurethane thoroughly and pour a small amount into a clean bucket. Dip a foam or lamb's wool applicator brush in the polyurethane and slap the applicator against the side of the bucket to get rid of the excess; avoid wiping the excess on the lip of the bucket.
  
  
• 5). Spread the polyurethane over the cabinet doors using broad, even strokes. As with the wood stain, you must work with the grain. Allow the polyurethane to dry, then lightly sand it with very fine grade sandpaper. Wipe the dust away with a damp rag and apply a second coat of polyurethane.