How to Hookup a Turntable to an AV Receiver
- 1). Attach one end of the the RCA audio cables to the RCA audio out ports on the turntable, ensuring the color-coded plugs are attached to the same colored inputs on the device.
- 2). Connect the other end of the RCA audio cables to one of the RCA audio inputs on the AV receiver. Take note of the input to which you connect the cables and how it is labeled.
- 3). Tune the AV receiver to the corresponding input. If the RCA cables from the turntable are plugged into "Input 1," for example, tune the AV receiver to input 1 using the input select control. The labeling and location of this button will vary depending on the make and model of your AV receiver, but it will typically be labeled "input," "input select," or the like. Press it repeatedly until the AV receiver is set to the correct input and, you should hear audio from the turntable through the AV receiver's speakers.
Source...