How to Close the HP 285P Elmo Projector
- 1). Power off the HP-285 by pressing the red power switch.
- 2). Unplug the AC power from the wall socket.
- 3). Set the HP-285 on its side, the one opposite the column and projector head.
- 4). Fold the head mirror down. The mirror is located at the top of the projector arm. It attaches with four hinges and folds down like a box lid.
- 5). Rotate the column and projector head so the projector head is positioned over the center line of the HP-285.
- 6). Tilt the column until it rests inside the side of the HP-285.
- 7). Tuck the projector head into the body of the HP-285 and slide it into place.
- 8). Lift the HP-285 using the plastic carrying handle on the middle upper side of the device.
Source...