Program Keyless Entry Neon Instructions
- 1). Place your key in the ignition and turn it to "Run" (position number three--don't start the engine).
- 2). Press and hold "Unlock" on a currently programmed remote for ten seconds. Continue to hold "Unlock," and then press the "Panic" (alarm) button. Release both buttons; the system will chime.
- 3). Press "Lock" on each remote you want to program (consecutively--not simultaneously). During this time, you'll also need to press "Lock" on each previously programmed remote because entering programming mode erases every stored code.
- 4). Turn the ignition to "Off" and remove the key to finalize the procedure.
Source...