How to Use a Sand Flea Rake
- 1). Take a five-gallon sized bucket and the sand flea rake to the nearest sandy beach during an outgoing tide. If you are unsure of when the tides change, consult a tide calendar for your region or call the local weather service.
- 2). Use your hands to scoop six to eight inches of wet sand into the bottom of the bucket.
- 3). Go to an area of the beach where the waves move in and out rapidly. For best results, the sandy bottom should be six to 12 inches under water as the waves flow in.
- 4). Wait for a wave to come into the shoreline and wash onto the beach. Stand and walk away from the water while the water rushes back out to sea. Drag the sand rake behind you.
- 5). Inspect the sand rake once the wave has completely receded and you are standing on dry ground. If there were sand fleas in the area, the rake will have collected them.
- 6). Place the sand fleas into the bucket. They will immediately burrow into the sand. Repeat Steps 3 through 5 until you have collected as many sand fleas as you need.
Source...