How to Insert Flush Trims
- 1). Determine where the canister for the recessed light is located in the ceiling. Mark the drywall using the pencil. Repeat this step at the location for additional recessed light canisters.
- 2). Puncture the drywall on the mark with a sharp object or the tip of a screwdriver.
- 3). Cut a hole into the drywall that is the diameter of the canister with the drywall knife. This will be used as the opening for the flush trim.
- 4). Insert the flush trim ring into the hole and thread it into place against the ceiling. Insert a screw into the hole in the flush trim ring and tighten with the Allen wrench.
Source...