How to Use a Scissor Type Knurling Tool
- 1). Position the knurling tool perpendicular to where you will position the metal cylinder on the lathe.
- 2). Position a metal cylinder on the lathe. Test the knurl against the cylinder, pressing gently until you understand how the pattern will appear. Reverse the direction of the lathe to determine how it affects the pattern.
- 3). Overlap the pattern by completing one full spindle turn before continuing with a second turn. Slowly move the knurling tool up the shaft until you complete the desired amount of knurling.
- 4). Remove the knurling tool. Slowly turn the cylinder on the lathe and run the metal file across it to file off any sharp edges.
Source...