How to Install Drawer Slides
- 1). Remove the drawer from the drawer cavity and remove any existing hardware that you will be replacing.
- 2). Open the package of drawer slides and determine which slides will be installed on the left side of the drawer and which slides will be installed on the right side of the drawer according to manufacturer instructions. Look at the inside of the drawer cavity and determine how the slides will be positioned for installation for the drawer and the drawer cavity.
- 3). Place the left slide in the drawer cavity with the bottom rail of the slide on the bottom of the cavity. The front of the lid must be aligned with the exterior of the drawer. It is important that the slide be level. Install the slide by screwing the screws included in the drawer slide kit.
Repeat with the right slide. - 4). Align the front of the slide and hold it secure while screwing the screws in both the back and the front of the rail.
- 5). Place the wheels into the rails at the back of the drawer cavity. Lower the drawer to align it and slowly push the drawer all the way into the cavity.
- 6). Ascertain that the drawer operates properly to finish the installation.
Source...