How to Install 2" Thermometers on a Char Griller
- 1). Measure the width of the Char Griller grill lid. Divide the measurement by two to find the center point. Mark the point with chalk on the black metal of the lid.
- 2). Measure 8 to 10 inches up from the lid opening on the Char Griller grill at the center point on the lid. Mark this location on the lid with chalk. The final location should rest above the handle and Char Griller logo on the grill lid.
- 3). Drill a 3/8-to-1/2-inch hole in the lid with a metal drill bit installed in a power drill. The hole size depends on the size of the thermometer stem.
- 4). Remove the nut from the thermometer stem. Insert the stem into the hole you drilled in the grill lid.
- 5). Lift the lid and find the stem of the thermometer. Slide the nut onto the thermometer stem. Tighten the nut with pliers to secure it to the grill lid.
Source...