Here is a photo of the Input Signal menu of the DreamVision Dream’E.
Input Source: Displays the active input being used.

Aspect Ratio: Displays the aspect ratio currently being used. The user change the aspect ratio to accommodate the source material or personal taste. Aspect Ratio settings available: Standard, Full Screen, Virtual Wide, Cinemascope. If using the Cinemscope mode in conjunction with optional widescreen lens kits, other subsettings are available.

Overscan: This either allows the entire image to be displayed or the hiding of the very edges of the image. Should be set to off unless there are odd screen edge artifacts on the source signal.

Black Level Setup: NTSC defines the black level to 7.5 IRE instead of 0 IRE. Set the IRE to the appropriate source signal standard.

Black Level Adjustment: Adjusts the degree of black.

White Level Adjustment: Adjusts the degree of white.

Position Adjustment: This function is used to change the image placement on the screen.

RGB Adjustment: This matches the correct parameter for the RGB signal.

HDMI Signal: This is used to setup the HDMI inputs. Set the HDMI level to Auto, PC, Video and the Colorspace to Auto, YPbPr or RGB according to video source.

Proceed to the next photo...