How to Flatten Out a Curved Bill
- 1). Plug in the iron and set it to steam. Allow the iron to heat up while fill up a spray bottle with water.
- 2). Spray water onto the curved bill until the bill is saturated.
- 3). Place the cap onto the ironing board so that the bottom of the bill is flush with the board's surface. Move the iron back and forth across the bill, pressing it down into the ironing board. Constantly move the iron to prevent the bill from burning.
- 4). Continue to iron the bill until it flattens out.
- 5). Set the cap on a clean surface to allow it to dry.
Source...