How to Make Exterior Cement Texture
- 1). Create the texture at the right time. The concrete needs to have set up some but cannot be fully cured. This could take a few hours, depending on your weather conditions and the type of concrete you used. Basically, the concrete needs to be hard enough for you to walk on.
- 2). Start at one end of the concrete with a concrete broom and pull it all the way across the surface in a straight line. You should be pulling the broom toward you as you walk. These brooms are made specifically for creating a texture on exterior concrete. For more dramatic texture, you can use a wire comb instead.
- 3). Repeat the texturing process with the broom until all of the concrete has a nice texture.
- 4). Purchase a concrete pattern for a more consistent texture. For example, you can use a pattern that gets stamped onto the wet concrete to create brick shapes throughout the area. You could also use a stamp that creates more basic sidewalk lines.
- 5). Add materials to the top of the wet cement, making the materials act as the texture instead of the cement itself. Use dry shaped cement color, which can give your cement a consistent red texture, for examplem or lay stones or gravel over the wet cement..
- 6). Spray the concrete surface with a curing compound. This is necessary when adding texture to the concrete.
Source...