Regulations for Test and Tag in NSW
The Occupational Health and Safety Amendment Regulations was enacted on April 28, 2006 to amend the previous law that was included in the Occupational Health and Safety Regulations of 2001. All workplaces are covered by the provisions in the amended law, which includes tagging, thermal imagers and microwave testers, among others.
What is required of the employer?
Electrical equipment used in any construction work should be regularly inspected and tested by a €competent person€ to make sure that they are safe to the user or other people in the workplace. All electrical equipment that could be affected by the environment that is considered as €hostile€ should be regularly inspected and maintained by a competent person.
The €hostile environment€ refers to the place of work where the equipment is subjected to stresses such as dust, heat or moisture that could potentially speed up the damage to the equipment in question. The damage could be as harmless as a mechanical trouble or expose the user to hazards like electrical shock or electrocution. Testing and tagging in Sydney or New South Wales will minimise these risks since they help ensure the equipment are in tip-top condition.
Not everything is included
What's important to understand is that not all electrical equipment that is plugged into a socket is covered by the regulations. You can skip testing and tagging in Sydney or New South Wales if the equipment and appliances are considered as low risk. This can only be done by proper risk assessment measures by an electrician or preferably by someone who is trained to test and tag in Australia. After the risk assessment, a report is prepared to itemise all the equipment or safety measures adopted by the company. If you have any problems about the requirements, you can always read the report Electrical Equipment Risk Assessment for tips and strategies.
Who is the competent person?
The competent person is somebody with a background and experience in dealing with electric equipment. For testing and tagging requirements or for operating withthermal imagers, the electrical contractor should have additional training for just such purpose. It should be emphasised that using thermal imaging equipment in hostile environments is different than the thermal devices you can purchases off the store. Although anybody can operate commercial thermal imagers, making an accurate evaluation out of the metrics is another thing. All the tests should comply with the provisions stated in AS/NZ 3760:2003.
What is required of the employer?
Electrical equipment used in any construction work should be regularly inspected and tested by a €competent person€ to make sure that they are safe to the user or other people in the workplace. All electrical equipment that could be affected by the environment that is considered as €hostile€ should be regularly inspected and maintained by a competent person.
The €hostile environment€ refers to the place of work where the equipment is subjected to stresses such as dust, heat or moisture that could potentially speed up the damage to the equipment in question. The damage could be as harmless as a mechanical trouble or expose the user to hazards like electrical shock or electrocution. Testing and tagging in Sydney or New South Wales will minimise these risks since they help ensure the equipment are in tip-top condition.
Not everything is included
What's important to understand is that not all electrical equipment that is plugged into a socket is covered by the regulations. You can skip testing and tagging in Sydney or New South Wales if the equipment and appliances are considered as low risk. This can only be done by proper risk assessment measures by an electrician or preferably by someone who is trained to test and tag in Australia. After the risk assessment, a report is prepared to itemise all the equipment or safety measures adopted by the company. If you have any problems about the requirements, you can always read the report Electrical Equipment Risk Assessment for tips and strategies.
Who is the competent person?
The competent person is somebody with a background and experience in dealing with electric equipment. For testing and tagging requirements or for operating withthermal imagers, the electrical contractor should have additional training for just such purpose. It should be emphasised that using thermal imaging equipment in hostile environments is different than the thermal devices you can purchases off the store. Although anybody can operate commercial thermal imagers, making an accurate evaluation out of the metrics is another thing. All the tests should comply with the provisions stated in AS/NZ 3760:2003.
Source...