Thermo-Moldable Foam Instructions
- 1). Preheat your oven to 225 degrees. When the oven is warmed up, slowly and carefully insert the shoes or the insoles that you wish to mold on the center rack. Close the oven and set a time for three minutes and let the items sit.
- 2). Open the oven door and use an oven glove to remove the shoes or insoles from the oven. Leaving the items in the oven for longer than three minutes can cause the moldable foam to become too hot for you to touch with your feet and will not mold properly.
- 3). Place the moldable shoes on the floor and slowly put your feet into them. If you are molding insoles, place them into the shoes you want to use them with. The foam will feel very warm. Tie the shoes as tightly as you would normally wear them and stand with your full weight equally balanced for two minutes.
- 4). Begin to walk and move around as you normally would while wearing the shoes after the two minutes are up. This will help improve the toe impressions in the shoe or insole. After five minutes, the foam will cool down and remain in the shape it is in. If you are not satisfied with the shape, you can repeat the process to try it again. You can reheat the foam and reshape it as many times as you wish.
Source...