A Label Printer For Serious Installers
The Brady IDXpert has been designed for the professionally-minded person. It is also constructed to stand up to the working conditions of the industrial community. The Brady IDXpert label printer has a hard plastic case to protect it from the beating in this industry. This case measures 48 x 39 x 14 centimeters. This label printer is offered in two different versions and both have a manual cutter. These two versions are the desk-top and the hand-held label printers. The engineer or the electrician is able to label faceplates, patch panels, and even cables in the domestic or industrial environment. They will also be able to identify bays, racks, and frames in a public network or center of the data environment.
The two main menus that can be used to configure this label printer are the "General ID" menu and a "DataComm& T-Block Menu." Not only does this printer have the continuous, die-cut, and self-laminating wire markers that include both flag and wrap types, but this Brady IDXpert label printer also can print terminal block identification strips. These terminal block identification strips can be printed with a choice of a separator and also with an auto-serial numbering option. With this printer, a heat-shrink sleeve may be printed up to six gauge or 0.32 inches in diameter.
This printer is very easy to use concerning the fonts because there is only one font offered. This font is offered in bold or regular. The size of this font can be scaled from 4 pt to 100 pt. This font can be reproduced in zones consisting of a good range of accented characters and can reproduce in independent lines. This font has been chosen in order to avoid any confusion between letters and those that resemble numbers or vice versa. The labels can be printed horizontally or vertically and can also be turned in ninety degree increments. There is also a repeat option that will duplicate the text as many times as will fit on the label. For example, this feature can be used on a cable marker and it can be seen from any angle it is viewed.
The serial numbering is simple and limited to increments of just one. It includes an option of starting to print from the last number when printing is resumed, but will only allow one numbering series per label. This printer system is alphanumeric which will allow upper and lower case letters to be a part of the number.
The Brady IDXpertcan generate the code 39 and the code 128 bar codes, both having the option to be read by humans. The width of the bar code can be set into two presets; the 2-dots and the 3-dots. The height can be adjusted by a few millimeters at a time also. In this print label the bar code is not generated until the label is printed.
This label printer comes highly recommended and is ranked highly for the toughness and flexibility for the working technician.
The two main menus that can be used to configure this label printer are the "General ID" menu and a "DataComm& T-Block Menu." Not only does this printer have the continuous, die-cut, and self-laminating wire markers that include both flag and wrap types, but this Brady IDXpert label printer also can print terminal block identification strips. These terminal block identification strips can be printed with a choice of a separator and also with an auto-serial numbering option. With this printer, a heat-shrink sleeve may be printed up to six gauge or 0.32 inches in diameter.
This printer is very easy to use concerning the fonts because there is only one font offered. This font is offered in bold or regular. The size of this font can be scaled from 4 pt to 100 pt. This font can be reproduced in zones consisting of a good range of accented characters and can reproduce in independent lines. This font has been chosen in order to avoid any confusion between letters and those that resemble numbers or vice versa. The labels can be printed horizontally or vertically and can also be turned in ninety degree increments. There is also a repeat option that will duplicate the text as many times as will fit on the label. For example, this feature can be used on a cable marker and it can be seen from any angle it is viewed.
The serial numbering is simple and limited to increments of just one. It includes an option of starting to print from the last number when printing is resumed, but will only allow one numbering series per label. This printer system is alphanumeric which will allow upper and lower case letters to be a part of the number.
The Brady IDXpertcan generate the code 39 and the code 128 bar codes, both having the option to be read by humans. The width of the bar code can be set into two presets; the 2-dots and the 3-dots. The height can be adjusted by a few millimeters at a time also. In this print label the bar code is not generated until the label is printed.
This label printer comes highly recommended and is ranked highly for the toughness and flexibility for the working technician.
Source...