Millions of people across the globe nowadays depend very much on the bottled drinking water just because of the impurities and other unhygienic issues.
Whatever the source of water supply, i.
e.
municipal pipeline or ground well, problems are almost same for both.
Bottled drinking water is not affordable to many because of its higher prices.
There is available a cheap solution for that, which is affordable and ensures the supply of pure drinking water.
Simply install a water filtration system.
Nowadays many people have become aware of the fact that consuming impure water is not good for health and is unhygienic.
It is also not possible to rely on bottled drinking water for long.
So, most of the people now have water filter installed in their homes.
Water filter ensures the supply of pure water and keep you and your family safe from harmful bacteria.
Water filters are commonly available in two designs.
There are water filters that filter the water coming into the entire house.
The second form of water filters are those, which are installed on any of the tap in the house to purify the water coming out of that tap only.
Having water filter in your house ensures the availability of clean and pure water for your family.
But having water filter is not enough, you have to clean or replace the filter at times.
Unfortunately, many people don't know how to change the filter and those who know often be careless towards replacing the filter regularly.
Dirty filters don't work effectively and the chances are you are drinking impure water with having dirty filter.
The process of replacing filter differs from filter to filter and brand to brand.
The large filter which supplies clean water to whole house is located somewhere at the point where water enters the house.
Replacing this filter require more cost and some special tools.
On the other hand the filter fitted on the tap requires much little efforts.
Just remove the whole gadget, take away the old filter and replace it with the new one.
Before attempting to replace a filter, read the instructions given on the manufacturer manual carefully.
Follow the directions given in the manual for the proper replacement of the filter.
You can also take help from internet.
Just search for your particular filter and follow the directions.
Almost all the single unit filtration units follow the same steps for filter replacement.
Cut off the water supply.
Dismiss the unit from the faucet.
You will locate the filter on the pipe or in some cases inside the little container.
Unfasten it and replace it with the new filter.
It is said that a fully functional clean filter is capable of removing ninety nine percent of the harmful bacteria from the water whereas dirty filter over time lost its effectiveness and potential to clean the water from bacteria and other impurities.
It is not a bad idea to spend few bucks on replacing the old dirty filter with new one to ensure the health of your loved ones.