How to Change the Spray Arm Bearing on a GE Dishwasher
- 1). Flip the GE dishwasher’s breaker switch, at your electrical breaker, to the “Off” position.
- 2). Pull out the lower rack from the GE dishwasher.
- 3). Unscrew the cap on the top center of the spray arm by turning it counterclockwise. You will see the bearing beneath the cap.
- 4). Pull out the old bearing, using needle-nose pliers.
- 5). Insert the new bearing by pushing it down until it snaps into place.
- 6). Replace the cap on the center of the spray arm.
- 7). Turn the power back on to the GE dishwasher.
Source...