Earrings Display Board

• 1). Cut a piece of cardboard or foam board to the desired size of display. Cut a smaller piece of cardboard or foam board that that can be used to prop up the first piece of cardboard or foam board on a table or flat surface. The dimensions of this smaller piece should be 1/4 of the first piece.
  
  
• 2). Attach the second piece of cardboard to the first using duct tape or masking tape. Angle the piece at 45 degrees when affixing it.
  
  
• 3). Cut a piece of thin cotton or polyester fabric the same size as the display board. Do not use a thick fabric, as it needs to be thin enough for earring studs to penetrate through the fabric and the cardboard. Use a solid color, rather than a print, so that the jewelry displayed is visible.
  
  
• 4). Use a glue stick to attach the fabric onto the board. Display pairs of earrings by poking the posts through the fabric and into the cardboard.
  
  

Tree Light Display

• 1). Arrange white Christmas lights around a miniature artificial Christmas tree.
  
  
• 2). Place the tree on a small table, shelf or flat surface that is near an electrical outlet. Plug the lights into the outlet. If you do not have access to electricity, substitute the Christmas lights with silver tinsel.
  
  
• 3). Hang bracelets and necklaces on the tree.
  
  

Muffin Pan Display

• 1). Clean and polish an old muffin pan. The pan can be sized for six or 12 muffins.
  
  
• 2). Spray-paint the pan, if desired, using a nontoxic paint. Wait 12 hours for the paint to dry completely so that it does not stain the jewelry.
  
  
• 3). Display jewelry in the muffin holes. Place one item (a bracelet, necklace, ring or pair of earrings) in each hole so that different pieces are neatly shown.