How to Inspect the Exhaust System on an Acura Integra
- 1). Find the exhaust manifold attached to the front of the engine, just behind the radiator. Remove the cover with a flathead screwdriver to check that the bolts are secure and the gaskets aren't worn. Look for moisture buildup or cracks on the manifold. Replace the cover and close the hood.
- 2). Lift the car on a hoist or hydraulic lift. Get under the car to inspect the entire exhaust system.
- 3). Shine a flashlight up under the car to inspect the gaskets and the bolts on the manifold where it meets the head pipe under the engine. Make sure the bolts are tight and the gaskets are secure.
- 4). Continue shining the light on the other parts of the exhaust, including the catalytic converter, muffler and tailpipe. Run your hand over the entire system to feel for holes, cracks, rust or loose connections. Tap gently with a hammer along each piece to locate weak sections.
- 5). Feel the hangars and clamps to make sure they are securely in place. The hangars on the Integra are rubber and should feel solid.
- 6). Lower the car when you are done inspecting the exhaust system on your Acura Integra.
Source...