Harley Oil Change Instructions
- 1). Start the Harley's engine on level ground and let the engine run for 10 minutes to get the engine oil warm. While the engine is warming up, locate the oil cap on the side of the crank case and the plug on the bottom of the engine that drains the engine oil.
- 2). Place the oil drain pan under the drain plug on the bottom of the engine. Remove the drain plug using the ratchet set. Once the engine oil has completely drained from the engine, replace the plug to the bottom of the engine and tighten the plug using the ratchet set.
- 3). Remove the cap that says "OIL" from the side of the engine. Insert an oil funnel into the hole and pour the specific type and amount of Harley-Davidson motorcycle engine oil into the crank case through the funnel. Remove the funnel and replace the oil cap to the engine and tighten the cap.
Source...