How to Remove the Ignition From a Jeep
- 1). Place the Jeep in park if it has an automatic transmission. Place the ignition key in the ignition and turn it to the "On" position.
- 2). Locate the small hole in the bottom of the steering column, just below the ignition. There is a tang inside the column that must be released before removing the ignition. Insert a small screwdriver or punch into the hole in the steering column and push the screwdriver up to depress the tang inside the housing.
- 3). Hold the screwdriver up and grasp the ignition with the other hand. Pull straight out on the ignition and withdraw it from the steering column. Release the tang by removing the screwdriver from the hole in the steering column.
Source...