How to Thread a Bobbin on a Sew E-Z Machine
- 1). Push the bobbin-cover-plate release button on the back of the machine to pop up the edge of the bobbin cover.
- 2). Remove the bobbin cover located to the right of the needle/foot of the machine.
- 3). Place a new bobbin in the bobbin compartment. Make sure the thread of the bobbin is pulling counterclockwise.
- 4). Turn the hand wheel toward you to make the needle go down into the needle plate. This will bring the end of the bobbin thread up through the needle plate.
- 5). Grab the end of the bobbin thread and the needle thread and pull a few inches of thread toward the back of the machine.
- 6). Replace the bobbin cover and snap into place.
Source...