How to Bind a Spektrum DX6i
- 1). Make sure that you have a DSM2 receiver. To properly bind the Spectrum DX6i transmitter, you must have a receiver that is compatible. This includes any of the Spektrum AR series receivers and will be listed on the packaging of your device.
- 2). Insert your bind plug into the BATT/BIND pins on the receiver. This port is usually the last port in the row.
- 3). Turn on your receiver by plugging it into a power source, usually the electronic speed controller or ESC. You will notice that the light on the receiver flashes; this lets you know the receiver is in bind mode.
- 4). Turn on your Spektrum DX6i transmitter while holding down the "Bind/Trainer" switch. After a few seconds, the light on your receiver will become a solid color indicating that you have effectively bound your Spektrum DX6i transmitter to your compatible receiver, and you can let go of the "Bind/Trainer" switch.
- 5). Remove your bind plug from the BATT/BIND port on the AR series receiver.
Source...