How to Install a Towel Rack in Drywall
- 1). Hold the towel rack up to the area where you wish to install it. Have a second person place a level on the top of the towel bar to ensure it sits level. Mark the positions of the towel rack's screw holes on both ends.
- 2). Make pilot holes in the wall where you marked with your pencil, using a drill with a quarter-inch bit. Insert hollow wall anchors into the holes that do not penetrate wall studs, pushing the wall anchors in so they sit flush with the wall.
- 3). Hold the towel rack back up to the wall so the holes in the rack line up with the holes in the wall. Drive screws through all of the holes until the screw heads sit flush with the towel rack.
Source...