How to Replace License Plate Bulbs on a 2003 Impala
- 1). Remove the two screws securing the license plate light assembly to the bumper, located directly above the license plate, using a Phillips screwdriver.
- 2). Pull the license plate light assembly down from the bumper.
- 3). Grab the bulb socket on the rear of the license plate light assembly and turn it counterclockwise to unlock it. Pull the socket and bulb out of the assembly.
- 4). Pull the old 194 light from the license plate light socket with a slight wiggling motion.
- 5). Press the new 194 bulb into the license plate socket. Make certain to use a clean, lint-free cloth when touching the bulbs, as the oils from your hands can cause the bulb to burn out prematurely.
- 6). Insert the bulb and socket back into the license plate assembly and turn it clockwise to lock the socket in place.
- 7). Push the license plate light assembly back up and into the bumper. Tighten the screws with a Phillips screwdriver.
- 8). Repeat Steps 1 through 7 for the bulb on the other side of the license plate.
Source...