How to Install an Engine Mount
- 1). Raise the front end of the vehicle with a jack then lower it onto jack stands.
- 2). Position the jack under the engine beneath the oil pan. Place the wood block between the jack and the oil pan.
- 3). Raise the engine up enough to slide a mount between the engine and the frame. Slide the mount into the mounting fixture and line up the mounting holes on the frame, mount and engine.
- 4). Lower the engine with the jack. Insert the mount's securing bolt into the holes and tighten the bolt to the torque specification for that vehicle. Refer to a shop manual specific to your vehicle's model-year for this information.
- 5). Raise the vehicle off the jack stands with the jack and remove them, then lower the vehicle to the ground.
Source...