How to Clean an Aluminum Diamond Plate Toolbox
- 1). Pour a can of cola onto the top of the tool box, using a paper towel or rag to distribute the cola evenly over the aluminum diamond plate. Let stand for five minutes.
- 2). Scrub the plate briskly with a stiff scrub brush; the dirt and grime will come off immediately.
- 3). Rinse thoroughly with plenty of clean water; taking care to remove all traces of cola from the diamond indentations. Dry with paper towels or a clean cotton rag, or allow to air dry.
- 4). Apply a high quality aluminum wax in an even coat according to the manufacturer's specifications, making sure you reach all crevices and indentations in the diamond plate; allow to dry.
- 5). Buff your waxed aluminum diamond plate toolbox by hand or with a powered buffer until it is polished and shiny. This will prevent grime from building up and allow you more time between cleanings.
Source...