How to Repair the Window on a Town & Country
- 1). Mix mild soap and warm water in the bucket using the soft cloth until it is sudsy. Wash the window down to get rid of as much dirt as possible. Let it air dry or wipe it dry with another cloth.
- 2). Place the suction cup stabilizer onto the window, making sure it is steadily placed over the cracked area. Push it down to create a tight suction.
- 3). Put the plastic injector into its port within the stabilizer. Once it is in place, push the resin tube into the injector.
- 4). Pull out the injector to automatically allow the natural suction to begin drawing the resin out of the tube and into the damaged areas.
- 5). Wait until the resin tube is empty and then lift the stabilizer off the window.
- 6). Place a thick strip of the curing film across the repair for a few hours until it has dried.
Source...