Features

• The SA306X range of Smeg ovens is equipped with a tangential cooling system, which is a 7.3 inches (185 mm long), 22-blade impeller cooling system. The system draws cool air from its ambient surroundings up through the two layers between its triple-paned glass oven window and requires only 22 watts to operate. In addition, the oven is also equipped with ceramic insulation, which is installed between the oven cavity's outer surface and the middle carcase. A second layer of ceramic insulation is located to the rear to further prevent the escape of internal heat. The SA306X also possesses removable triple glazing, and the inner and middle layers of the panes can be removed and reattached without the use of any additional tools. The frame housing the outer pane can also be fully removed.
  
  

Components

• The SA306X models manufactured by Smeg are provided with the following components: mounting screws, instructions, baking/grill tray, grill grid insert, biscuit tray, two chromed-wire shelves, two grill trays, removable roof liner, safety grip handles, catalytic wall liners, two pins for door removal and GT123DX three-level telescopic shelf racks.
  
  

Power Supply

• The Smeg SA306X can draw upon a maximum current of 11.5 amps and requires an electricity supply of 240 volts at 50 Hz. It is supplied with a 1.5 meter power cord connected to a 15-amp 3-pin insulated plug to wire the oven. It is suitable to plug directly into a 15 amp power socket.
  
  

Dimensions

• When flush mounted, the Smeg SA306X has a height of 23.4 inches (595 mm), a width of 23.5 inches (596 mm) and a length of 22.3 inches (566 mm). When proud mounted, it has a length of approximately 23.0 inches (585 mm), a width of 22.2 inches (564 mm) and a height of 22.0 inches (560 mm). It has a net weight of 70.5 lbs. (32 kg) and a gross weight of 83.7 lbs. (38 kg).