Tips On How To Properly Install Your New Refrigerator
Refrigerator installation is one of the key things you would want to consider when buying a new fridge.
You wouldn't want to deal with a machine that is very difficult to install.
Check out the following tips on how to properly install your new refrigerator: 1.
After your fridge has been delivered, do not immediately plug the machine.
Allow it to rest for about 4 hours first.
There is a chance that the transit of the machine made its motor warm.
Immediately cooling it down can speed up its deterioration.
2.
Open the door of the fridge and remove labels or stickers inside.
Just don't remove the yellow energy guide sticker so you will know more about its energy consumption.
Your refrigerator set might include ice trays and ice pick.
Remove those things inside first.
3.
While waiting for your fridge to rest, inspect the exterior part and the compartments.
Make sure there are no damages incurred during transit.
You have to check the condenser coils and the exterior covering of the fridge and make sure that there are no damages.
If there are any, do not use it first.
Call customer service and tell them your problem.
4.
Before buying your new fridge, you should already measure the doorways and stairways of your house.
Make sure you buy a refrigerator that can fit in those parts of your house so you can install this machine with ease.
You would want to make a map of the route the delivery guys will follow when delivering your fridge into your home.
5.
After the machine has already rested for about 4 hours, push it to its designated place.
Leave at least 2 inches of space in between the back of the fridge and the wall.
There should be ample space for hot air to expel.
You wouldn't want to insulate hot air because this can cause an increase in energy consumption.
6.
Plug the refrigerator directly to the outlet.
Do not use an extension chord.
Modern appliances today need a high supply of energy.
Using extension chords might cut the flow of energy.
This might prevent the machine from cooling down the temperature inside.
7.
Do not install the fridge close to an appliance with a heating element.
For instance, you would want to install the fridge on the opposite side of the microwave oven.
The heat from the microwave oven might mess up with its cooling functions.
You wouldn't want to deal with a machine that is very difficult to install.
Check out the following tips on how to properly install your new refrigerator: 1.
After your fridge has been delivered, do not immediately plug the machine.
Allow it to rest for about 4 hours first.
There is a chance that the transit of the machine made its motor warm.
Immediately cooling it down can speed up its deterioration.
2.
Open the door of the fridge and remove labels or stickers inside.
Just don't remove the yellow energy guide sticker so you will know more about its energy consumption.
Your refrigerator set might include ice trays and ice pick.
Remove those things inside first.
3.
While waiting for your fridge to rest, inspect the exterior part and the compartments.
Make sure there are no damages incurred during transit.
You have to check the condenser coils and the exterior covering of the fridge and make sure that there are no damages.
If there are any, do not use it first.
Call customer service and tell them your problem.
4.
Before buying your new fridge, you should already measure the doorways and stairways of your house.
Make sure you buy a refrigerator that can fit in those parts of your house so you can install this machine with ease.
You would want to make a map of the route the delivery guys will follow when delivering your fridge into your home.
5.
After the machine has already rested for about 4 hours, push it to its designated place.
Leave at least 2 inches of space in between the back of the fridge and the wall.
There should be ample space for hot air to expel.
You wouldn't want to insulate hot air because this can cause an increase in energy consumption.
6.
Plug the refrigerator directly to the outlet.
Do not use an extension chord.
Modern appliances today need a high supply of energy.
Using extension chords might cut the flow of energy.
This might prevent the machine from cooling down the temperature inside.
7.
Do not install the fridge close to an appliance with a heating element.
For instance, you would want to install the fridge on the opposite side of the microwave oven.
The heat from the microwave oven might mess up with its cooling functions.
Source...