How to Build Your Own Photo Light Box Cube
- 1
The lumber yard can cut the strips or you can cut them with a table saw.lumber image by Kimberly Reinick from Fotolia.com
Nail one 16-inch strip of lumber to both ends of the 20-inch pieces of lumber. Nail the remaining 16-inch strip to the ends of the other sides of the 20-inch strips. Check that all four corners are square. - 2). Nail the plywood bottom to the box you have made. Turn the box with the open side up. Attach the battery-operated lights to the plywood with the four metal clamps. A clamp-on fluroscent light could be used to shine through the top glass, according to a light box plan from A Digital Photography School: How to Make an Inexpensive Light Tent -- DIY(See References 1).
- 3
Plexiglas has a smoky finish that naturally diffuses the glass.nach hause telefonieren image by Oliver Hirte from Fotolia.com
Place the four pieces of cork evenly around the Plexiglas or glazed glass, then glue them in place. When the glue has dried, turn the glass over and lay it on top of the box.
Source...