Simple Maintenance Guide for Table Fans
Table fans provide inexpensive and sufficient cooling for a small area, but if you do not take proper care and regularly maintain your table fan, not only will the cooling power of the fan decrease, but you will most likely need to spend a few dollars to get it fixed.
To avoid that, here is an easy guide to maintain your table fan.
You will need lint-free cloth, normal cloth, mild soap, water and a handheld vacuum.
1.
Switch off the electrical source.
To avoid electrocution, unplug the table fan from the electrical outlet.
2.
Vacuum the vents.
Using the handheld vacuum, vacuum the vents located inside the motor housing at the back of the fan.
This is to ensure air circulates into the motor.
3.
Remove the fan grill.
Before you do so, check the model of the fan.
If it is one where they use screws to assemble the grill, then you best get a screwdriver on hand.
If it is one where the grills are just kept in place using movable brackets, then you just need to unclip these brackets.
4.
Clean the blades and soak the grill.
To save time, soak the grill in a tub of warm soapy water to remove accumulated dust before you proceed to clean the fan blades.
You can choose to clean the blades while it is still attached to the fan body, or you can unscrew to remove it from the body.
Using a cloth, dampen it with some mild soap solution.
It is better to use one that is specifically for household cleaning purposes.
Wipe the blades gently, taking care to remove all dust and grime.
Leave the blades and the grill to dry completely.
5.
Wipe the external parts of your fan.
While waiting for the blades and grill to dry, use the lint-free cloth to wipe down any excess dust from the base of your table fan and its surrounding areas.
You can dampen the lint-free cloth, but be careful to not let any water drip into the electrical components of the fan.
6.
Reassemble the table fan parts.
Do so once the blades and the grill have dried completely.
Make sure that you screw the blades back on tightly.
7.
Maintain regularly.
You can do this simple cleaning and maintaining procedure at least once a month.
But to keep off excess dust and grime, blow the blades using the handheld vacuum or a compressed can of air on a weekly basis.
These seven simple steps to clean and maintain your table fan guarantee you a satisfying cooling experience as well as avoiding any unwanted repair costs.
To avoid that, here is an easy guide to maintain your table fan.
You will need lint-free cloth, normal cloth, mild soap, water and a handheld vacuum.
1.
Switch off the electrical source.
To avoid electrocution, unplug the table fan from the electrical outlet.
2.
Vacuum the vents.
Using the handheld vacuum, vacuum the vents located inside the motor housing at the back of the fan.
This is to ensure air circulates into the motor.
3.
Remove the fan grill.
Before you do so, check the model of the fan.
If it is one where they use screws to assemble the grill, then you best get a screwdriver on hand.
If it is one where the grills are just kept in place using movable brackets, then you just need to unclip these brackets.
4.
Clean the blades and soak the grill.
To save time, soak the grill in a tub of warm soapy water to remove accumulated dust before you proceed to clean the fan blades.
You can choose to clean the blades while it is still attached to the fan body, or you can unscrew to remove it from the body.
Using a cloth, dampen it with some mild soap solution.
It is better to use one that is specifically for household cleaning purposes.
Wipe the blades gently, taking care to remove all dust and grime.
Leave the blades and the grill to dry completely.
5.
Wipe the external parts of your fan.
While waiting for the blades and grill to dry, use the lint-free cloth to wipe down any excess dust from the base of your table fan and its surrounding areas.
You can dampen the lint-free cloth, but be careful to not let any water drip into the electrical components of the fan.
6.
Reassemble the table fan parts.
Do so once the blades and the grill have dried completely.
Make sure that you screw the blades back on tightly.
7.
Maintain regularly.
You can do this simple cleaning and maintaining procedure at least once a month.
But to keep off excess dust and grime, blow the blades using the handheld vacuum or a compressed can of air on a weekly basis.
These seven simple steps to clean and maintain your table fan guarantee you a satisfying cooling experience as well as avoiding any unwanted repair costs.
Source...