How to Make a Tin Can Lantern
- 1). Clean any size empty tin can.
- 2). Fill can with water and place in freezer until water is frozen.
- 3). Draw designs on frozen can with a marker or crayon.
- 4). Lay can in middle of large bath towel.
- 5). Roll each end of the towel toward can to form a barrier that will guard against slipping.
- 6). Wear safety glasses.
- 7). Use a large nail and hammer to poke holes in can following your design.
- 8). Place finished frozen can in sink to thaw.
- 9). Place 1 to 2 inches of sand in bottom of can.
- 10
Insert votive or other candle into sand. - 11
Light candle.
Source...