1993 Acura Integra Lock Cylinder Removal
- 1). Pop the hood. Remove the negative terminal on the battery and let the Integra sit for 10 minutes before working on the steering column. This is to make sure the air bag will not accidentally deploy.
- 2). Remove the steering column cover from the column using the Phillips-head screwdriver. Remove the panel just below the steering column using the 1/4-inch ratchet and socket.
- 3). Locate the shear bolts securing the ignition to the column. Hit the center of these shear bolts with the center punch so that there is a dent in the center of the bolt. Drill out the bolts using the drill and 3/16-inch drill bit. Then pull out the ignition lock and unplug the harness leading to it.
Source...