How to Set Up Multiple FTA Receivers
- 1). Connect the coaxial cable running from the wall (i.e., the cable connected to the satellite dish) to the "In" port on the back of the FTA receiver. Make sure the cable is securely fastened to the device.
- 2). Attach a different coaxial cable to the "Out" port of the FTA receiver. Plug the other end of this cable into the "In" port of the television set.
- 3). Power on your television and FTA receiver, and set your television to either channel 3 or channel 4 (depending on what the default setting on the television is). You can now watch the FTA content.
- 4). Repeat this process with all of the FTA receivers you have. If you have a satellite dish capable of supporting up to four receivers (four separate cables running from the dish), you can connect anywhere from one to four receivers to the dish.
Source...