How to Remove the Agitator From a Whirlpool Washing Machine
- 1). Open the lid of the Whirlpool washing machine.
- 2). Remove the agitator's plastic cap, which is a decorative piece that conceals the agitator's retaining bolt. To remove the cap, locate the small cutout along the edge of the cap. Insert the tip of a flathead screwdriver into the cutout, then pry the cap free with the screwdriver.
- 3). Remove the plastic cap located just beneath the agitator's cap, if applicable. The plastic cap, sometimes referred to as a "post cap," is present on more recent Whirlpool models. To remove the cap, simply pull the cap out of the agitator.
- 4). Remove the agitator's single retaining bolt with a wrench. The retaining bolt is located in the center of the agitator.
- 5). Remove the agitator's auger. The auger is the threaded portion of the agitator and is used to twist the contents of the washer. The auger can be removed by simply pulling it straight up and out of the washer.
- 6). Remove the base of the agitator. Grasp the base on opposite sides, then pull the agitator up and out of the washer.
Source...