How to Use a Wireless-G Game Adapter

• 1). Connect the Ethernet cable to the back of the Wireless-G Game Adapter, and plug the other end into the Ethernet jack of a computer
  
  
• 2). Power on the Wireless-G Game Adapter, then the computer.
  
  
• 3). Insert the Installation CD into the computer's CD-ROM drive.
  
  The auto-configuration wizard should start automatically.
  
  
• 4). Use the auto-configuration wizard to configure the Wireless-G Game Adapter with the appropriate settings.
  
  The wizard will ask for the SSID (service set identifier), which is basically the network's name, and the security information. Select the proper security type (if applicable) and enter the network security key.
  
  
• 5). Disconnect the Ethernet cable from the computer after finishing the auto-configuration wizard, and power off the Wireless-G Game Adapter.
  
  
• 6). Connect the side of the Ethernet cable that was in the computer to the gaming console.
  
  
• 7). Power on the Wireless-G Gaming Adapter, then the gaming console.