How to Repair a Chevy Keyless Entry
- 1). Close all doors, then insert the key into ignition and hold down the "Unlock" button on the driver's door panel. Continue to hold down the "Unlock" button.
- 2). Turn the ignition to the "On" position then immediately turn the ignition to the "Off" position. Repeat this step again immediately.
- 3). Release the power "Unlock" button on the door panel. The vehicle responds with the doors locking and unlocking automatically. Hold down the "Lock"and "Unlock" buttons on the remote simultaneously until the doors lock and unlock. This may take up to 30 seconds. Turn the ignition to the "On" position to exit the programming mode.
Source...